美国直连宽带优化网络小技巧

admin

BBR加速优化
脚本①：bash <(curl -l -s https://raw.githubusercontent.co ... ads/main/install.sh)

脚本②：yum install wget -y && wget -O tcp.sh https://gitee.com/suiyuansoft/Linux-NetSpeed/raw/master/tcp.sh && bash tcp.sh

脚本③：wget -N --no-check-certificate "https://raw.githubusercontent.com/chiakge/Linux-NetSpeed/master/tcp.sh" && chmod +x tcp.sh && ./tcp.sh

admin

【以下代码直接复制服务器运行！适合美国4G服务器！没有你对应配置服务器的联系客服定制！】

sudo cp /etc/sysctl.conf /etc/sysctl.conf.bk_$(date +%Y%m%d_%H%M%S) && sudo sh -c 'echo "kernel.pid_max = 65535
kernel.panic = 1
kernel.sysrq = 1
kernel.core_pattern = core_%e
kernel.printk = 3 4 1 3
kernel.numa_balancing = 0
kernel.sched_autogroup_enabled = 0

vm.swappiness = 10
vm.dirty_ratio = 10
vm.dirty_background_ratio = 5
vm.panic_on_oom = 1
vm.overcommit_memory = 1
vm.min_free_kbytes = 189829

net.core.default_qdisc = cake
net.core.netdev_max_backlog = 2877
net.core.rmem_max = 15532032
net.core.wmem_max = 15532032
net.core.rmem_default = 87380
net.core.wmem_default = 65536
net.core.somaxconn = 1438
net.core.optmem_max = 65536

net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_max_tw_buckets = 32768
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 0

net.ipv4.tcp_rmem = 8192 87380 15532032
net.ipv4.tcp_wmem = 8192 65536 15532032
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_congestion_control = bbr
net.ipv4.tcp_notsent_lowat = 4096
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_adv_win_scale = 6
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0

net.ipv4.tcp_max_syn_backlog = 5755
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_syncookies = 1

net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.route.gc_timeout = 100
net.ipv4.neigh.default.gc_stale_time = 120
net.ipv4.neigh.default.gc_thresh3 = 8192
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh1 = 1024

net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.arp_ignore = 1" > /etc/sysctl.conf' && sudo sysctl -p

admin

【以下代码直接复制服务器运行！适合美国8G服务器！没有你对应配置服务器的联系客服定制！】

sudo cp /etc/sysctl.conf /etc/sysctl.conf.bk_$(date +%Y%m%d_%H%M%S) && sudo sh -c 'echo "kernel.pid_max = 65535
kernel.panic = 1
kernel.sysrq = 1
kernel.core_pattern = core_%e
kernel.printk = 3 4 1 3
kernel.numa_balancing = 0
kernel.sched_autogroup_enabled = 0

vm.swappiness = 10
vm.dirty_ratio = 10
vm.dirty_background_ratio = 5
vm.panic_on_oom = 1
vm.overcommit_memory = 1
vm.min_free_kbytes = 315658

net.core.default_qdisc = cake
net.core.netdev_max_backlog = 2877
net.core.rmem_max = 15532032
net.core.wmem_max = 15532032
net.core.rmem_default = 87380
net.core.wmem_default = 65536
net.core.somaxconn = 1438
net.core.optmem_max = 65536

net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_max_tw_buckets = 32768
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 0

net.ipv4.tcp_rmem = 8192 87380 15532032
net.ipv4.tcp_wmem = 8192 65536 15532032
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_congestion_control = bbr
net.ipv4.tcp_notsent_lowat = 4096
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_adv_win_scale = 6
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0

net.ipv4.tcp_max_syn_backlog = 5755
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_syncookies = 1

net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.route.gc_timeout = 100
net.ipv4.neigh.default.gc_stale_time = 120
net.ipv4.neigh.default.gc_thresh3 = 8192
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh1 = 1024

net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.arp_ignore = 1" > /etc/sysctl.conf' && sudo sysctl -p

admin

【以下代码直接复制服务器运行！适合美国16G服务器！没有你对应配置服务器的联系客服定制！】


sudo cp /etc/sysctl.conf /etc/sysctl.conf.bk_$(date +%Y%m%d_%H%M%S) && sudo sh -c 'echo "kernel.pid_max = 65535
kernel.panic = 1
kernel.sysrq = 1
kernel.core_pattern = core_%e
kernel.printk = 3 4 1 3
kernel.numa_balancing = 0
kernel.sched_autogroup_enabled = 0

vm.swappiness = 10
vm.dirty_ratio = 10
vm.dirty_background_ratio = 5
vm.panic_on_oom = 1
vm.overcommit_memory = 1
vm.min_free_kbytes = 567316

net.core.default_qdisc = cake
net.core.netdev_max_backlog = 2877
net.core.rmem_max = 15532032
net.core.wmem_max = 15532032
net.core.rmem_default = 87380
net.core.wmem_default = 65536
net.core.somaxconn = 1438
net.core.optmem_max = 65536

net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_max_tw_buckets = 32768
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 0

net.ipv4.tcp_rmem = 8192 87380 15532032
net.ipv4.tcp_wmem = 8192 65536 15532032
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_congestion_control = bbr
net.ipv4.tcp_notsent_lowat = 4096
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_adv_win_scale = 6
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0

net.ipv4.tcp_max_syn_backlog = 5755
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_syncookies = 1

net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.route.gc_timeout = 100
net.ipv4.neigh.default.gc_stale_time = 120
net.ipv4.neigh.default.gc_thresh3 = 8192
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh1 = 1024

net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.arp_ignore = 1" > /etc/sysctl.conf' && sudo sysctl -p

admin

【以下代码直接复制服务器运行！适合美国16G服务器！没有你对应配置服务器的联系客服定制！】



sudo cp /etc/sysctl.conf /etc/sysctl.conf.bk_$(date +%Y%m%d_%H%M%S) && sudo sh -c 'echo "kernel.pid_max = 65535
kernel.panic = 1
kernel.sysrq = 1
kernel.core_pattern = core_%e
kernel.printk = 3 4 1 3
kernel.numa_balancing = 0
kernel.sched_autogroup_enabled = 0

vm.swappiness = 10
vm.dirty_ratio = 10
vm.dirty_background_ratio = 5
vm.panic_on_oom = 1
vm.overcommit_memory = 1
vm.min_free_kbytes = 1048576

net.core.default_qdisc = cake
net.core.netdev_max_backlog = 2877
net.core.rmem_max = 15532032
net.core.wmem_max = 15532032
net.core.rmem_default = 87380
net.core.wmem_default = 65536
net.core.somaxconn = 1438
net.core.optmem_max = 65536

net.ipv4.tcp_fastopen = 3
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_slow_start_after_idle = 0
net.ipv4.tcp_max_tw_buckets = 32768
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 0

net.ipv4.tcp_rmem = 8192 87380 15532032
net.ipv4.tcp_wmem = 8192 65536 15532032
net.ipv4.tcp_mtu_probing = 1
net.ipv4.tcp_congestion_control = bbr
net.ipv4.tcp_notsent_lowat = 4096
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_adv_win_scale = 6
net.ipv4.tcp_moderate_rcvbuf = 1
net.ipv4.tcp_no_metrics_save = 0

net.ipv4.tcp_max_syn_backlog = 5755
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_syncookies = 1

net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.route.gc_timeout = 100
net.ipv4.neigh.default.gc_stale_time = 120
net.ipv4.neigh.default.gc_thresh3 = 8192
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh1 = 1024

net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.arp_announce = 2
net.ipv4.conf.default.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.default.arp_ignore = 1" > /etc/sysctl.conf' && sudo sysctl -p